Chinese Journal of Magnetic Resonance ›› 2023, Vol. 40 ›› Issue (4): 462-470.doi: 10.11938/cjmr20233056

• Articles • Previous Articles     Next Articles

Investigation of an Ultra High Signal-to-noise Ratio Physics Package for the Rubidium Atomic Clock

CUI Jiaqi1,2,3,LIU Kangqi1,2,3,LI Junyao1,2,3,WANG Fang1,2,MING Gang1,2,ZHAO Feng1,2,MEI Ganghua1,2,#(),ZHONG Da1,2,*()   

  1. 1. Innovation Academy for Precision Measurement Science and Technology, Chinese Academy of Sciences, Wuhan 430071, China
    2. Key Laboratory of Atomic Frequency Standards, Chinese Academy of Sciences, Wuhan 430071, China
    3. University of Chinese Academy of Sciences, Beijing 100049, China
  • Received:2023-03-02 Published:2023-12-05 Online:2023-03-17
  • Contact: * Tel: 027-87198726, E-mail: zhongda@apm.ac.cn; # Tel: 027-87197190, E-mail: mei@apm.ac.cn.

Abstract:

Driven by the demand for satellite navigation and deep space exploration, the performance of lamp-pumped rubidium atomic clock has been greatly improved, and its short-term frequency stability has reached the level of a small coefficient of 10-13τ -1/2. To further improve the frequency stability of rubidium clock and explore its performance limit, this article is based on the redesign and experimental verification of the structure of the physical package (PP, Φ40 microwave cavity) in the early stage, with a comprehensively optimized design of the optical system of PP, the performance of the spectral lamp and pumping light has been enhanced. Finally, the SNR of PP has been significantly increased. The test and evaluation results showed that the contribution of the shot noise of the newly designed PP to the frequency stability of rubidium clock is 4.2×10-14τ -1/2. The results of this research lay the foundation for the short-term stability of rubidium clocks to achieve 5×10-14τ -1/2, and the long-term stability to break through 1×10-15.

Key words: rubidium atomic clock, physics package, signal-to-noise ratio, spectral lamp, frequency stability

CLC Number: