波谱学杂志 ›› 2017, Vol. 34 ›› Issue (1): 108-114.doi: 10.11938/cjmr20170113

• 低场磁共振技术与应用专栏 • 上一篇    下一篇

利用低温NMR技术测定木材及其热处理材纤维饱和点

周凡丁1, 高鑫2, 蔡家斌1, 庄寿增1, 周洪杰1   

  1. 1. 南京林业大学 材料科学与工程学院, 江苏 南京 210037;
    2. 中国林科院 木工研究所, 北京 100091
  • 收稿日期:2015-12-30 修回日期:2017-01-09 出版日期:2017-03-05 发布日期:2017-03-05
  • 通讯作者: 蔡家斌,Tel:13505179534,E-mail:nldfloor@163.com E-mail:nldfloor@163.com
  • 基金资助:
    江苏高校优势学科建设工程资助项目(PAPD)

Determination of Treated and Control Wood on Fiber Saturation Point by Low-Field NMR Technology

ZHOU Fan-ding1, GAO Xin2, CAI Jia-bin1, ZHUANG Shou-zeng1, ZHOU Hong-jie1   

  1. 1. College of Materials Science and Technology, Nanjing Forestry University, Nanjing 210037, China;
    2. Research Institute of Wood Industry, Chinese Academy of Forestry, Beijing 100091, China
  • Received:2015-12-30 Revised:2017-01-09 Online:2017-03-05 Published:2017-03-05

摘要: 实验基于核磁共振技术(Nuclear Magnetic Resonance,NMR)检测的无损性,利用低场NMR技术测定热处理前后花旗松的纤维饱和点(Fiber Saturation Point,FSP).在-3℃和25℃条件下,对CPMG(Carr-Purcell-Meiboom-Gill)脉冲测得的信号进行横向弛豫时间(T2)分析,对比试样冷冻前后信号反演峰面积,确定试样吸着水饱和含量,得到不同热处理条件下花旗松的纤维饱和点依次为38.76%(对照材)、32.82%(180℃热处理)、29.40%(200℃热处理)、24.90%(220℃热处理).实验结果表明,热处理温度越高,纤维饱和点越低.该结果测试结果与木材学理论相符,表明NMR技术可应用于快速确定木材纤维饱和点.

关键词: 纤维饱和点(FSP), 横向弛豫时间(T2), 热处理, 核磁共振(NMR)

Abstract: Due to its non-destructive characteristic, nuclear magnetic resonance (NMR) spectroscopy was used to study the fiber saturation point (FSP) of Pseudotsuga menziesii before and after heat treatment. The bound water amount in saturated wood cell wall was determined by analysis of T2 relaxation time distributions measured using GPMG (Carr-Purcell-Meiboom-Gill) sequence at -3℃ and 25℃. Results showed that the FSP of Pseudotsuga menziesii treated with various temperatures are 32.82% (180℃), 29.40% (200℃), 24.90% (220℃) and 38.76% (untreated), which indicate that FSP of Pseudotsuga menziesii decreases with increased heat treatment temperature. This study reflects that NMR could provide detailed information about wood water distribution rapidly and efficiently.

Key words: T2 relaxation time, nuclear magnetic resonance (NMR), heat treatment, fiber saturation point (FSP)

中图分类号: