利用核磁共振测定木材吸着水饱和含量

doi:10.11938/cjmr20150412

波谱学杂志 ›› 2015, Vol. 32 ›› Issue (4): 670-677.doi: 10.11938/cjmr20150412

• 低场磁共振技术与应用专栏 • 上一篇下一篇

利用核磁共振测定木材吸着水饱和含量

高鑫，庄寿增*

南京林业大学材料科学与工程学院，江苏南京 210037

收稿日期:2015-04-20 修回日期:2015-10-22 出版日期:2015-12-05 发布日期:2015-12-05
作者简介:高鑫(1986-)，男，江苏徐州人，博士研究生，木材科学与技术专业． *通讯联系人：庄寿增，电话： 025-85427058， E-mail： szzhuang@njfu.edu.cn.
基金资助:
国家自然科学基金资助项目(30771677)，江苏省研究生培养创新工程资助项目(CXZZ13_0543)

Bound Water Content in Saturated Wood Cell Wall Determined by Nuclear Magnetic Resonance Spectroscopy

GAO Xin， ZHUANG Shou-zeng*

College of Material Science and Engineering, Nanjing Forestry University, Nanjing 210037, China

Received:2015-04-20 Revised:2015-10-22 Online:2015-12-05 Published:2015-12-05
About author:*Corresponding author： ZHUANG Shou-zeng, Tel: +86-25-85427058, E-mail: szzhuang@njfu.edu.cn.
Supported by:
国家自然科学基金资助项目(30771677)，江苏省研究生培养创新工程资助项目(CXZZ13_0543)

摘要/Abstract

摘要：

利用核磁共振(NMR)技术研究了室温与-3 ℃ 条件下 5 种树种木材内水分质子的自旋-自旋弛豫时间(T₂)特性，室温下各树种木材试样 T₂ 弛豫时间特性的不同是由木材微观构造导致的．通过对比冷冻前后各树种试样的信号反演峰面积，确定了其吸着水饱和含量，樟子松 38.3%，杉木 38.5%，杨木 36.0%，白蜡木 35.6%，轻木 47.6%，均高于通过吸湿外推法估算数值，与溶剂排出法、多孔板法、离心法等实测法获得的吸着水饱和含量的结果相近，核磁共振技术可作为木材内吸着水含量快速测定的实验方法．

关键词: 核磁共振(NMR), 吸着水含量, 自旋-自旋弛豫时间(T₂), 木材, 细胞壁饱和润胀

Abstract:

¹H spin-spin relaxation time (T₂) of water in 5 species of wood was measured by nuclear magnetic resonance (NMR) spectroscopy at room temperature and -3℃, which is thought to be related to the anatomical structure of the wood. The bound water content within swollen cell wall was determined by comparison of the inversion peak area before and after frozen treatment: Pinus sylvestris 38.3%, Cunninghamia lanceolata 38.5%, Populus sp. 36.0%, Fraxinus excelsior L. 35.6% and Ochroma pyramidale 47.6%. The bound water contents determined by NMR spectroscopy were apparently higher than those obtained by the conventional extrapolation methods, but similar to the results obtained by the solute exclusion method, porous plate method, centrifugal dewatering method. It is concluded that NMR may provide a rapid and non-destructive way to determine bound water content in wood.

Key words: nuclear magnetic resonance(NMR), bound water content, spin-spin relaxation time, wood, cell wall

中图分类号:

O482.53

高鑫，庄寿增*. 利用核磁共振测定木材吸着水饱和含量
[J]. 波谱学杂志, 2015, 32(4): 670-677.

GAO Xin， ZHUANG Shou-zeng*. Bound Water Content in Saturated Wood Cell Wall Determined by Nuclear Magnetic Resonance Spectroscopy
[J]. Chinese Journal of Magnetic Resonance, 2015, 32(4): 670-677.

参考文献

[1] Liu Yi-xing(刘一星), Zhao Guang-jie(赵广杰). Wood Resource Materials(木质资源材料学)[M]. Beijing(北京): China Forestry Press(中国林业出版社), 2004.

[2] Gu Lian-bai(顾炼百). Wood Processing Technology(木材加工工艺学)[M]. Beijing(北京): China Forestry Press(中国林业出版社), 2003.

[3] John C F. Primary Wood Processing[M]. Netherlands: Springer, 2006.

[4] Babiak M, Kudela J. A contribution to the definition of the fiber saturation point[J]. Wood Sci Technol, 1995, 29(3): 217－226.

[5] Feist W C, Tarkow H. A new procedure for measuring fiber saturation points[J]. For Prod J, 1967, 17(10): 65－68.

[6] Cloutier A, Fortin Y. Moisture content-water potential relationship of wood from saturated to dry conditions[J]. Wood Sci Technol, 1991, 25(4): 263－280.

[7] Cloutier A, Tremblay C, Fortin Y. Effect of specimen structural orientation on the moisture content-water potential relationship of wood[J]. Wood Sci Technol, 1995, 29(4): 235－242.

[8] Choong E T, Tesoro F O. Relationship of capillary pressure and water saturation in wood[J]. Wood Sci Technol, 1989, 23(2): 139－150.

[9] Hill C A S. Wood Modification: Chemical, Thermal and Other Processes[M]. Chichester: Wiley, 2006.

[10] Telkki V V, Yliniemi M, Jokisaari J. Moisture in softwoods: fiber saturation point, hydroxyl site content, and the amount of micropores as determined from NMR relaxation time distributions[J]. Holzforschung, 2013, 67(3): 291－300.

[11] Araujo C D, MacKay A L, Hailey J R T, et al. Proton magnetic resonance techniques for characterization of water in wood: application to white spruce[J]. Wood Sci Technol, 1992, 26(2): 101－113.

[12] Hartley I D, Stavros A, MacKay A L. ¹H NMR studies of water interactions in sitka spruce and western hemlock: moisture content determination and second moments[J]. Wood Sci Technol, 1996, 30(2): 141－148.

[13] Nicole L, Bernard D J, Lartigue J C, et al. Moisture content and extractive materials in Maritime pine wood by low field ¹H NMR[J]. Holzforschung, 2002, 56(1): 25－31.

[14] Almeida G, Gagné S, Hernández R E. A NMR study of water distribution in hardwoods at several equilibrium moisture contents[J]. Wood Sci Technol, 2007, 41(4): 293－307.

[15] Ma Da-yan(马大燕), Wang Xi-ming(王喜明), Zhang Ming-hui(张明辉). Mechanism of water sorption during adsorption process of wood studied by NMR(核磁共振研究木材吸着过程水分吸附机理)[J]. Chinese J of Magn Reson(波谱学杂志), 2011, 28(1): 135－141.

[16] Zauer M, Kretzschmar J, Groβmann L, et al. Analysis of the pore -size distribution and fiber saturation point of native and thermally modified wood using differenttial scanning calorimetry[J]. Wood Sci Technol, 2014, 48(1): 177－193.

[17] Cheng Jun-qing(成俊卿). Wood Science(木材学)[M]. Beijing(北京): China Forestry Press(中国林业出版社), 1985.

利用核磁共振测定木材吸着水饱和含量

Bound Water Content in Saturated Wood Cell Wall Determined by Nuclear Magnetic Resonance Spectroscopy

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 5

编辑推荐

Metrics

本文评价

[1]	余登洁, 郭盼, 吴嘉敏, 贺玉成, 徐征. 用于木材水分检测的单边核磁共振传感器设计[J]. 波谱学杂志, 2017, 34(4): 508-518.
[2]	高玉磊, 张明辉. 基于时域核磁共振技术的木材吸湿过程研究[J]. 波谱学杂志, 2016, 33(2): 295-304.
[3]	田佳欣1，刘文卿1，宋艳红1，轩亚楠1，李军方2，姚叶锋1，魏达秀1. 利用仲氢诱导极化技术实现 Deutsch*算法 [J]. 波谱学杂志, 2015, 32(4): 618-627.
[4]	魏莹1,2，章文军1，薛蓉2，李晓晶2，裴奉奎2. 基于 ¹H NMR*谱的给药赭石大鼠血清代谢组学研究 [J]. 波谱学杂志, 2015, 32(4): 628-636.
[5]	郭盼1，籍勇亮2，何为1，徐征1*. 一种测量大型原木内部水分的微型NMR 传感器 [J]. 波谱学杂志, 2015, 32(4): 678-687.