波谱学杂志 ›› 1996, Vol. 13 ›› Issue (6): 539-546.

• 研究论文 • 上一篇    下一篇

抗冲聚丙烯微结构的研究

鲁非1, 洪昆仑1, 朱清仁1, 张其锦2, 胡雪松2   

  1. 1. 中国科学技术大学结构分析开放研究实验室, 合肥;
    2. 中国科学技术大学材料科学与工程系, 合肥 230026
  • 收稿日期:1996-04-15 修回日期:1996-05-22 出版日期:1996-12-05 发布日期:2018-01-17

INVESTIGATIONS ON THE MICROSTRUCTURES OF IMPACT POLYPROPYLENES

Lu Fei1, Hong Kunlun1, Zhu Qingren1, Zhang Qijin2, Hu Xuesong2   

  1. 1. Structure Research Laboratory, University of Scienca and Technology of China, Hefei 230026;
    2. Department of Material Science and Engineering. Universily of Scienceand Technology of China, Hefei 2300
  • Received:1996-04-15 Revised:1996-05-22 Online:1996-12-05 Published:2018-01-17

摘要: 利用13C NMR对抗冲聚丙烯的微结构进行了研究.结果表明,由于抗冲聚丙烯聚合工艺的差别,4个抗冲聚丙烯样品中的乙烯链段的序列分布也不同.根据抗冲聚丙烯的13C NMR谱,计算出了丙烯段的次甲基和甲基的峰强度,由此建立了表征抗冲聚丙烯共聚物中丙烯链段的立构规整度的方法.

关键词: 抗冲聚丙烯, 13C NMR, 微结构

Abstract: The microstructures of impact polypropylenes were investigated by 13C NMR spectroscopy.It was found that the ethylene sequence distributions were different in various impact polypropylenes made through distinctive manufacturing procedures. Isotacticity in the porpylene sequences of these copolymers were determined directly from 13C NMR spectra in methyl region with the aid of methine Peaks.

Key words: Impact polypropylene, 13C NMR, Microstructure